您好,欢迎访问深圳市永辉盛进出口有限公司   道康宁硅胶材料!

RBL-9200系列(20度-75度)
您的位置: 主页 > 产品中心 > 液态硅胶 > RBL-9200系列(20度-75度)

道康宁 RBL-9200-65(AB) 食品级液态硅橡胶

  • 美国陶氏XIAMETER™(道康宁)RBL-9200-65(AB)属于食品级液态硅胶原材料,65邵氏硬度、RBL-9200-65液体硅橡胶是一种半透明的通用LSR,由于流变性的改善和使用寿命的延长,其配方具有优异的工艺性能。...
  • 产品详情

65 Shore A hardness, 1 to 1 mix Liquid Silicone Rubber (LSR) designed for liquid injection molding

Features & Benefits 

• Unique rheology 

• Improved flowability 

• Longer pot-life 

• Excellent process performance enables short cycle times 

• Food contact: Formulated to meet requirements of BfR XV recommendation and of FDA 21 CFR 177.2600 

• Drinking water: KTW and WRAS approved


Applications 

SILASTIC™ RBL-9200-65 Liquid Silicone Rubber is a translucent, general purpose LSR, formulated to give excellent process performance due to improved rheology and longer potlife. 

This product can be used in a wide range of applications, including but not limited to: 

• General consumer goods articles 

• Food contact ( e.g. cooking ware, valves, diaphragms) 

• Water approved applications (e.g. shower heads) 

• Grommets, gaskets


Typical Properties

微信截图_20230320162234.png

微信截图_20230320162244.png

Description 

SILASTIC RBL-9200-65 Liquid Silicone Rubber is a general purpose injection-molding elastomer. It belongs to the SILASTIC™ RBL-9200 Series, developed to be suitable for a wide range of typical silicone rubber applications.


How To Use 

Mixing And De-Airing :The A and B components are supplied strained and de-aired to be used as lot matched kits. Mix parts A and B in a 1:1 ratio. Meter mix equipment which pumps, meters and mixes the two components without incorporation of air is strongly recommended for production. If air bubbles are entrapped during mixing the mixture must be thoroughly de-gassed under vacuum. 

Pot Life :When Parts A and B are mixed the mixture will remain useable for 72 hours at 25°C (77°F). 

Cleaning :The uncured silicone can readily be removed by most hydrocarbon solvents. Polar solvents, such as ketones and alcohols are not suitable. 

Curing :SILASTIC RBL-9200-65 Liquid Silicone Rubber cures readily at elevated temperatures. A 2 mm cross-section typically requires 6–10 seconds at 196°C (385°F). The cure time depends on the thickness and the cure temperature used. Cure can be inhibited by contact with certain materials such as amines, sulfur, and organotin complexes. 

Pigmentation :This is normally carried out during mixing and dispensing of the two components. XIAMETER™ Color Master Batches are recommended with normal addition levels of 2 to 4% based on total volume.


Regulatory Compliance 

Food Contact :SILASTIC RBL-9200-65 Liquid Silicone Rubber is formulated to meet BfR XV recommendation and FDA 21 CFR 177.2600. 

Drinking Water :SILASTIC RBL-9200-65 Liquid Silicone Rubber is certified according to KTW guideline: • Sealings: cold water 23°C and hot water 85°C 

SILASTIC RBL-9200-65 Liquid Silicone Rubber is also approved by the WRAS – Water Regulations Advisory Scheme. 

It remains the customer’s responsibility to ensure Dow’s products are suitable for customer’s intended use and comply with all laws and regulations applicable to such use.





标签: 道康宁 陶氏

本站相关网页素材及相关资源部分来源互联网,如有侵权请速告知,我们将会在24小时内删除            Copyright © 2002-2021 深圳市永辉盛进出口有限公司 版权所有 备案号:粤ICP备2022153326号

15338852054